DDW-120 - Ethernet Extender

SKU: 3621-0110 $780.88
The DDW-120 Ethernet Extender is the ideal solution for extending your Ethernet network over copper cables where in the past the only option would have been fibre. At shorter ranges the data rate will be as high as 15.3 Mbit/s in both directions. The technology used suggests transmission distances of up to 10 km at lower data rates, depending on the quality of the cables. In practical applications however much greater distances have been achieved. The SHDSL transmission technology makes the DDW-120 perfect for the re-use of existing copper cable installations from older communications networks. It is transparent for multicast addressing, VLAN packets, allows VPN pass-through for IPSec and can be used with protocols like MODBUS/TCP and Profinet IO. The units will auto negotiate the transmission speed but can also be forced to choose a slower (more reliable) or faster (less reliable) data rate. DDW-120 can be used in point-to-point applications or as start or termination unit together with the DDW-220/222/225 in daisy-chain applications.

Transparent Ethernet Extender
192 kbit/s to 15.3 Mbit/s
Up to 10 km (6.2 miles) on twisted pair· LFF (Link Fault Forward)
Plug and Play
• Auto MDI/MDI-X
• Auto negotiation
• Auto polarity
10/100BaseTX
Settings for: Reliable Mode. High speed mode or Normal mode
Wide temperature range (–40°C to +70°C)
Comprehensive diagnostics
Total galvanic isolation & transient protection
Industrial and Railway approval
Redundant power and wide DC input range

Download the Data Sheet

Download the Manual

Search Online:
© 2014 IndustrialENET. All rights reserved.
Design by IndustrialENET